This small 24mm diameter reversing camera comes with a drill bit to make the appropriate size hole in your bumper. It comes with a power lead to connect to the reversing lights so it comes in automatically when you select reverse gear and cables to connect to your sat nav.
When the camera powers up the sat nav will automatically switch from navigation to camera mode and back again when you come out of reverse.
Kit Contents
- 1 Colour Camera
- 1 Cutting Tool for Camera
- Power Lead
- Phono Visual Lead
- User Manual
|
|
Some Useful Measurement Information
(measurements are approximate and not guaranteed) |
| Component |
Length x Width x Depth |
| Diameter Size For Drilling Camera |
18.5mm (Drill Bit Supplied) |
| Size of Recess Camera |
24mm Diameter 35mm Deep |
| Length of Phono Cable |
4m |
Maintenance
No routine maintenance or adjustment is required. Dirt, frost or snow accumulated on the camera may be cleaned off carefully with a soft cloth. Do not use chemicals or spirits. Applying hot water in frozen conditions may damage the camera. The camera can be washed carefully with warm soapy water.
