View Basket
Shopping Basket:
0 items, £0.00
Checkout Now >
Ford Nationwide Mobile Fitting

Dolphin Flush Parking Sensor Kit - Audio & Dash Display - Wireless

Product Code: DFM470
Dolphin Flush Parking Sensor Kit - Audio & Dash Display - Wireless
£99.95 inc. tax

£83.29 ex. tax
? Tax based on United Kingdom.

Dolphin Flush Parking Sensor Kit - Audio & Dash Display - Wireless - Description

This kit is the flush fitting version of the DPS470 kit.  Your best buy for the most professional looking installation yet! Rather than drilling holes in the bumper and pushing the sensors into place as with our other parking sensor kits with this system you get a hole punch included with the kit and fit the sensors from the rear.

Flush Fit Sensors
These sensors have a large adhesive rim which means that after you have used the hole punch to create your hole, you just need to remove the red layer and adhere the sensor to the inner side of your bumper with the centre lined up in the hole. Finally the inner part of the sensor then has a screw mechanism to adjust the front of the head forwards to align it with the front of the bumper, this mechanism allows for different thickness of bumpers to give a proper flush fitting. Fixing sensors in this way mean that they are flush with your bumper giving the ultimate discrete factory fitted look.

Please note our flush sensors are only available in a gloss black finish.

Side Straight on

What You Get
The Dolphin flush fit kit is a high quality 4 flush mounting sensor system that will cover the widest range of cars giving a professional finish. The control box takes the information from the sensors and wirelessly transmits it as you reverse to a display mounted at the front of the car which gives you both Audio alerts and digital count down in 10cm units. The display at the front needs to be wired for power. (there is an on/off switch for the buzzer).

Kit Contents

  • 4 Flush Fit Bumper Sensors
  • 1 Control Unit
  • Wireless Display with Buzzer Unit
  • 1 x 16.5mm Hole Punch FREE!
  • Fitting Accessories
  • Instruction Manual
This is an example of the display in action. If you had an obstruction just on one side of the car the illuminated bars would vary and the shortest distance reading would be displayed.
Display in action

Swap socket feature on the flush fit parking sensors

Swap Socket Feature
All of our kits come with the watertight swap socket feature based 12 inches from the sensor heads, it makes installation quicker and easier than standard sensors offered by other companies. Also should you ever have any problems with faulty sensors, or accident damage in the future, it facilitates easy replacement without having to remove the bumper again and rewire from scratch.

Hole Punch Included
The Kit includes a 16.5mm hole punch to perforate bumper with the exact hole size for the sensor to be placed through.

Hole Punch

How it works
The system works by radiating ultrasonic beams throughout the area behind the vehicle. The beams are then reflected by obstructions behind the vehicle, and re-enter the sensors. The control box uses the reflected beam information to calculate the distance of the obstruction.

As with the other systems the Dolphin unit is activated when reverse gear is engaged. As the vehicle is reversing, when the vehicle is less than 1.5 metres from the obstruction the audible alert will emit intermittent bleeps. As the vehicle gets closer to the obstruction the frequency of the bleeps increases. At 30 centimetres from the obstruction the bleeps become a continuous solid tone.

200 - 160cm
Safe Mode
150 - 100cm
Safe Mode
90 - 50cm
Alarm Mode
40 - 30cm
Danger Mode
30 - 0cm

Technical Specification - Click Here

Sample Installations

Mercedes A 180

Toyota Prius



No routine maintenance or adjustment is required. Dirt, frost or snow accumulated on the sensors may cause the system to activate incorrectly. The sensors can be washed carefully with warm soapy water

Related Products
Customer Reviews
No Reviews Posted Yet - be the first!(write review)